Deposit Control is the second step to quality water treatment. By controlling scale deposits, bacteria, corrosion and algae, this component leads to greater efficiency and longer appliance lifecycles further “downstream.”
Choosing the correct components depends primarily on the size and type of pipes to be treated. While all applications require a controller, installations made on magnetic pipes will also need a reaction chamber. If the installation is made on a copper pipe you will need a signal enhancer in addition to the controller.
Battery Powered Microprocessor Deposit Control ( Pipes up to 1" or less )
Voltage: 12VDC
Amperage: Draws less than 1 Amps
Coil length: 3.5"
Solenoid Coil Included, Pipe Wrapping Required
Residential/Commercial
High Temperature Applications for Triangular Wave Technologies Deposit Control
Systems 176°F and above (Teflon Wire Required)
Call for Quote: US (800) 728-3420 Int. (201) 750-1063
Residential Deposit Control System for Pipes up to 0.5" or less–
Voltage: 9 vdc
Amperage: Draws less than 1 Amp
Coil length: 4"
Solenoid Coil Included, Pipe Wrapping Required.
Call for Quote: US (800) 728-3420 Int. (201) 750-1063
Residential/Light Commercial Deposit Control System for Pipes up to 1" or less–
Voltage: 9 vdc
Amperage: Draws less than 1 Amp
Coil length: 4"
Solenoid Coil Included, Pipe Wrapping Required.
Call for Quote: US (800) 728-3420 Int. (201) 750-1063