Controller

The basic component in the TWT systems is the deposit controller. It is comprised of a microprocessor, solenoid coil wrap and/or a reaction chamber. The microprocessor is a patented controller that functions like a small computer to relay a continuous electrical power supply to the solenoid coil and/or reaction chamber. The reaction chamber is plumbed into the main water in-take line and/or just before each piece of vital p rocessing equipment, and provides a factory-wrapped wire coil forming a solenoid. The solenoid conveys the triangular wave signal at the appropriate power level (as allowed by the model chosen) to the water passing through the chamber. This signal constantly changes the polarity, frequency, and amplitude of the current entering the water. This triangular wave treatment produces several benefits. It increases the capability of the water to hydrate scale ions and other colloidal particles. In effect, the surface charge of the hydrogen molecules is enhanced and the water is made wetter. This hydrated water can dissolve unwanted particles, suspend them in solution, and allow them to be easily filtered out or flushed from the system. Accordingly, the mineral and biological particles that cause scale, deposits, and corrosion are dissolved and washed away. This means that the breeding environments for bacteria, such as bio-film and corrosion, are eliminated. The agitation created in the reaction chamber also disrupts the conditions essential for the normal reproduction of bacteria and they die, thus allowing them to be harmlessly flushed out of the system.


with Reaction Chamber
12 products

Products

2" Deposit Controller with Industrial Reaction Chamber - St/St
SKU: TWT-5C8-402-ISRC

Commercial/Industrial Deposit Control System for Pipes up to 2" or less with TWT-ISRC-2" Factory Wrapped Industrial St/St Reaction Chamber


Call for Quote: US (800) 728-3420 Int. (201) 750-1063
3" Commercial/Industrial Deposit Control System
SKU: TWT-5C8-403

Commercial/ Industrial Deposit Control System for Pipes up to 3" or less

Voltage: 120 vac
Amperage: Draws less than 2 Amps
Coil length: 7"

Solenoid Coil Included, Pipe Wrapping Required.
Factory wrapped wire coil (solenoid) Reaction Chambers recommended
Other voltage source available upon request


Call for Quote: US (800) 728-3420 Int. (201) 750-1063
4" Commercial/Industrial Deposit Control System
SKU: TWT-5C8-404

Commercial/ Industrial Deposit Control System for Pipes up to 4" or less

Voltage: 120 vac
Amperage: Draws less than 2 Amps
Coil length: 7"

Solenoid Coil Included, Pipe Wrapping Required.
Factory wrapped wire coil (solenoid) Reaction Chambers recommended
Other voltage source available upon request


Call for Quote: US (800) 728-3420 Int. (201) 750-1063
6" Commercial/Industrial Deposit Control System
SKU: TWT-5C8-406

Commercial/ Industrial Deposit Control System for Pipes up to 6" or less

Voltage: 120 vac
Amperage: Draws less than 3 Amps
Coil length: 4.5"

Solenoid Coil Included, Pipe Wrapping Required.
Factory wrapped wire coil (solenoid) Reaction Chambers recommended
Other voltage source available upon request


Call for Quote: US (800) 728-3420 Int. (201) 750-1063
8" Commercial/Industrial Deposit Control System
SKU: TWT-5C8-408

Commercial/ Industrial Deposit Control System for Pipes up to 8" or less

Voltage: 120 vac
Amperage: Draws less than 3 Amps
Coil length: Contact TWT directly for solenoid winding instructions

Solenoid Coil Included, Pipe Wrapping Required.
Factory wrapped wire coil (solenoid) Reaction Chambers recommended
Other voltage source available upon request


Call for Quote: US (800) 728-3420 Int. (201) 750-1063
10" Industrial Deposit Control
SKU: TWT-5C8-410

Industrial Deposit Control ( Pipes up to 10" or less )

Voltage: 120 vac
Amperage: Draws less than 3 Amps
Coil length: Contact TWT directly for solenoid winding instructions

Solenoid Coil Included, Pipe Wrapping Required.
Factory wrapped wire coil (solenoid) Reaction Chambers recommended
Other voltage source available upon request


Call for Quote: US (800) 728-3420 Int. (201) 750-1063