Copper pipes, although acceptable, are one of the more difficult of materials to work with. To overcome this...
TWT has developed its Copper Pipe Signal Enhancer. This unit is placed between the Deposit Controller and the
solenoid coil on the copper pipe. The function of the signal enhancer is to provide a proper impedance match and to
ensure maximum energy transfer between the controller and the solenoid, which, in turn, ensures enhanced treatment
of the fluid.
Magnetic pipe materials such as steel, galvanized steel, iron, ductile iron or cast iron become shields and prevent the
proper energy transfer to the fluid path. For magnetic pipe applications we offer a full line of factory wrapped wire coil
Reaction Chambers. TWT products are designed to provide comprehensive solutions to water and fluid management
problems. The Copper Pipe Signal En h a n c e r and its equivalent for the magnetic pipe environment, TWT Reaction
Chambers, offer the answer to limited signal penetration, ensuring optimal results. The copper signal enhancer is a
passive signal / impedance matching circuit. This device provides a power boost to the conditioning signal in
copper pipes.
Special Note: Copper pipe signal enhancers are to be used on copper pipes only.
1 CSE black housing box with pre-mounted CSE unit, and 4 pre-drilled 1/2" holes for easy assembly and installation. CSE kit may be mounted vertically or horizontally. Box dimensions: 6.25"W x 4.25"H x 1.75"D
4 connectors for CSE housing box, controller and solenoid connections
2 plastic hole plugs (cover remaining holes)
1 15’ length of flex tubing for connection from housing box to deposit controller
1 10’ length of flex tubing from housing box to onsite solenoid connection
1 extra 55' extra spool of wire
Call for Quote: US (800) 728-3420 Int. (201) 750-1063
1 CSE black housing box with pre-mounted CSE unit, and 4 pre-drilled 1/2" holes for easy assembly and installation. CSE kit may be mounted vertically or horizontally. Box dimensions: 5.5"W x 4.625"H x 2.375"D
4 connectors for CSE housing box, controller and solenoid connections
2 plastic hole plugs (cover remaining holes)
1 15’ length of flex tubing for connection from housing box to deposit controller
1 10’ length of flex tubing from housing box to onsite solenoid connection
1 extra 55' extra spool of wire
Call for Quote: US (800) 728-3420 Int. (201) 750-1063
1 CSE black housing box with pre-mounted CSE unit, and 4 pre-drilled 1/2" holes for easy assembly and installation. CSE kit may be mounted vertically or horizontally. Box dimensions: 6.25"W x 4.25"H x 1.75"D
2 plastic hole plugs (cover remaining holes)
Call for Quote: US (800) 728-3420 Int. (201) 750-1063
1 CSE black housing box with pre-mounted CSE unit, and 4 pre-drilled 1/2" holes for easy assembly and installation. CSE kit may be mounted vertically or horizontally. Box dimensions: 5.5"W x 4.625"H x 2.375"D
2 plastic hole plugs (cover remaining holes)
Call for Quote: US (800) 728-3420 Int. (201) 750-1063